BUY IT NOW
…or call us at 573-624-5362 to make arrangements!
Gibson Limited Edition Les Paul Custom (9 lbs 12 oz)
Antique Alpine White
LPC-PSL17771 - Serial # CS503329
New from:
Dexter Music Center
Authorized Gibson Dealer and Service Center
The finish on this limited run was experimental.
Instead of "classic white", I decided to add antique toner
to the last three coats of lacquer as I do with my limited reissue runs.
It adds warmth to the color and tones down the binding, taking the bright white to a nice subtle aged look. In talking with the finish professionals, a point was made that this would age better than the "classic white". Notice the pic at the neck joint. As the toner is in the last three coats of lacquer, it doesn't fill in like a solid classic white would. Adding to the authentic look. As the guitar would start showing wear, the original alpine white would also start showing through as the 70's guitars would do over time. The added bonus is that the guitar doesn't smell like an ashtray! This one is the darkest I've had in a while. Very much like the LP Custom played by Randy Rhoads.
________________________________________________________________________________________________
Designed to Be the Best
Gibson Custom Shop is the pinnacle of craftsmanship, quality, and sound excellence. Each instrument celebrates Gibson's legacy through accuracy, authenticity and attention to detail.
As the flagship model from Gibson Custom Shop, the Les Paul Custom lives up to the high standards set by its 1950s archetype while evolving to a level of tone and performance more suited to today's musical demands. Beneath the layers of its "tuxedo" appointments lies the crisp, edgy voice of an Alnico II Burstbucker set, a solid Ebony fingerboard, a long neck tenon for maximum sustain and a two-piece maple top over a solid mahogany body which adds the perfect amount of sonic bite to everything from jazz to hard rock. It sounds as good as it looks, and it looks as good as it sounds!
Body
Body Shape Les Paul
Top 2-Piece Plain Maple
Back 1-Piece Mahogany
Binding Multi-ply
Weight Relief 9-Hole - 9 lbs. 12 oz.
Finish Nitrocellulose with Antique Toner VOS
Neck
Material Solid Mahogany
Scale Length 24.75" / 628.65mm
Neck Dimensions 1st fret .832” / 12th fret .983”
Fingerboard Material Solid Ebony
Fingerboard Radius 12"
Number Of Frets 22
Frets Medium-Jumbo
Nut Material Corian|
Nut Width 1.69" / 42.85mm
End of Board Width 2.24" / 56.89mm
Inlays Mother of Pearl Block
Joint Long Tenon
Hardware
Finish Nickel
Tuner Plating Nickel
Bridge Tune-O-Matic
Tailpiece Stop Bar
Tuning Machines Grover Metal Tulip
Pickguard Black Multi-Ply (Installed on request)
TrussRod 2-way Adjustable
Truss Rod Cover 2-Ply Engraved Les Paul Custom
Control Knobs Black Top Hat with Silver Insert
Switch Tip Amber Catalin
Switchwasher Black
Jack Plate Cover Nickel-plated Brass
Control Covers Black
Strap Buttons Brass
Mounting Rings Black M69
Pickup Covers Gold-Plated
Electronics -Alnico II
Neck Pickup Burstbucker 1 – 7.89k ohms|
Bridge Pickup Burstbucker 2 – 8.03k ohms
Controls 2 500K CTS Volume Pots, 2 500K CTS Tone Pots, Hand-Wired Harness, Switchcraft Toggle Switch
Pickup Selector 3-Way Switchcraft
Output Jack Switchcraft
Miscellaneous
Strings Gauge .010, .013, .017, .026, .036, .046
Case Custom Shop Hardshell
Accessories Certificate of Authenticity Booklet
BUY IT NOW
…or call us at 573-624-5362 to make arrangements!
Gibson Limited Edition Les Paul Custom (9 lbs 12 oz)
Antique Alpine White
LPC-PSL17771 - Serial # CS503329
New from:
Dexter Music Center
Authorized Gibson Dealer and Service Center
The finish on this limited run was experimental.
Instead of "classic white", I decided to add antique toner
to the last three coats of lacquer as I do with my limited reissue runs.
It adds warmth to the color and tones down the binding, taking the bright white to a nice subtle aged look. In talking with the finish professionals, a point was made that this would age better than the "classic white". Notice the pic at the neck joint. As the toner is in the last three coats of lacquer, it doesn't fill in like a solid classic white would. Adding to the authentic look. As the guitar would start showing wear, the original alpine white would also start showing through as the 70's guitars would do over time. The added bonus is that the guitar doesn't smell like an ashtray! This one is the darkest I've had in a while. Very much like the LP Custom played by Randy Rhoads.
________________________________________________________________________________________________
Designed to Be the Best
Gibson Custom Shop is the pinnacle of craftsmanship, quality, and sound excellence. Each instrument celebrates Gibson's legacy through accuracy, authenticity and attention to detail.
As the flagship model from Gibson Custom Shop, the Les Paul Custom lives up to the high standards set by its 1950s archetype while evolving to a level of tone and performance more suited to today's musical demands. Beneath the layers of its "tuxedo" appointments lies the crisp, edgy voice of an Alnico II Burstbucker set, a solid Ebony fingerboard, a long neck tenon for maximum sustain and a two-piece maple top over a solid mahogany body which adds the perfect amount of sonic bite to everything from jazz to hard rock. It sounds as good as it looks, and it looks as good as it sounds!
Body
Body Shape Les Paul
Top 2-Piece Plain Maple
Back 1-Piece Mahogany
Binding Multi-ply
Weight Relief 9-Hole - 9 lbs. 12 oz.
Finish Nitrocellulose with Antique Toner VOS
Neck
Material Solid Mahogany
Scale Length 24.75" / 628.65mm
Neck Dimensions 1st fret .832” / 12th fret .983”
Fingerboard Material Solid Ebony
Fingerboard Radius 12"
Number Of Frets 22
Frets Medium-Jumbo
Nut Material Corian|
Nut Width 1.69" / 42.85mm
End of Board Width 2.24" / 56.89mm
Inlays Mother of Pearl Block
Joint Long Tenon
Hardware
Finish Nickel
Tuner Plating Nickel
Bridge Tune-O-Matic
Tailpiece Stop Bar
Tuning Machines Grover Metal Tulip
Pickguard Black Multi-Ply (Installed on request)
TrussRod 2-way Adjustable
Truss Rod Cover 2-Ply Engraved Les Paul Custom
Control Knobs Black Top Hat with Silver Insert
Switch Tip Amber Catalin
Switchwasher Black
Jack Plate Cover Nickel-plated Brass
Control Covers Black
Strap Buttons Brass
Mounting Rings Black M69
Pickup Covers Gold-Plated
Electronics -Alnico II
Neck Pickup Burstbucker 1 – 7.89k ohms|
Bridge Pickup Burstbucker 2 – 8.03k ohms
Controls 2 500K CTS Volume Pots, 2 500K CTS Tone Pots, Hand-Wired Harness, Switchcraft Toggle Switch
Pickup Selector 3-Way Switchcraft
Output Jack Switchcraft
Miscellaneous
Strings Gauge .010, .013, .017, .026, .036, .046
Case Custom Shop Hardshell
Accessories Certificate of Authenticity Booklet
Image 1 of 16
Image 2 of 16
Image 3 of 16
Image 4 of 16
Image 5 of 16
Image 6 of 16
Image 7 of 16
Image 8 of 16
Image 9 of 16
Image 10 of 16
Image 11 of 16
Image 12 of 16
Image 13 of 16
Image 14 of 16
Image 15 of 16
Image 16 of 16