|
Plug in to
all-tube tone that takes no prisoners! The incredibly versatile Renegade
Head is a 2-channel powerhouse that gives you the tools to forge your
sound and the power to move some serious air in any size venue. Channel
1 produces lush, three dimensional clean tones with just a bit of grunt
when you dig in. Channel 2 starts with a sweet, bluesy overdrive, but
pushing the gain opens the floodgates, unleashing enough thick,
harmonically rich distortion to satisfy the most demanding player. Both
channels offer an independent 3-band EQ, Egnater’s BRIGHT and TIGHT
switches and a Wattage Selector switch that lets you choose between an
intimate 18W or a wall-shaking 65W. Master Presence and Density knobs
let you sculpt the high and low-end response.
At
the heart of this tone machine, you’ll find five 12AX7 preamp tubes and
a power section fueled by two 6L6s and two EL34s. Renegade features the
ground-breaking TUBE MIX function on each channel, allowing you to blend
the deep Californian character of the 6L6s with the aggressive British
midrange punch of the EL34s. There are independent reverb controls for
each channel, dual footswitchable master volumes and a speaker-emulated
line out. The included 4-button footswitch controls much more than just
channel switching. It also engages the on-board reverb, effects loop and
secondary master volume with channel-assigning switches for all three.
Run them on both channels or just the one you choose. |
|
• 65-Watt All-Tube Head
• Two Independent Channels Each With:
Volume, Gain, 3-Band EQ
Tight and Bright Voicing Switches
18w/65w Wattage Selector Switch
Tube Mix Blends 6L6 and EL34 Power Tubes
• Master Controls:
Presence & Density
Individual Reverb on Each Channel with “Spillover”
Main and Secondary Master Volumes
• Simple Master Bias Adjust with External Test Points
• Buffered Effects Loop
• Balanced XLR / ¼” Cabinet Voiced Line /Recording Output
• 100V / 115V / 230V Voltage Selector
• Heavy Duty Cover Included |
RENEGADE TUBES
•
6 x 12AX7
•
2 x 6L6
•
2 x EL34
FOOTSWITCH : Rugged Four Button Footswitch
with Channel Select Plus: Assign the REVERB, EFFECTS LOOP and MAIN 2
Volume to Just Channel 1, Just Channel 2 or Both – Right From the Pedal. |
